This CHMT48VB is an update version of CHMT48VA, which included dual
side feeders with total 58pcs (left 29pcs + right 29pcs).
The operation system is the same as CHMT48VA and it can install
more different kinds of materials, using 502---507 different kinds
of Juki nozzles, suitable for 0402,0603,0805-5050,
SOP,QFN,LQFP144,Diode,Transistor,BGA...etc, which can meet more
Suitable for for prototype builders, hobbyists, developers, and development
groups and small factories batches production.
|PCB area||10mm*10mm - 355mm*355mm|
|X Y axis Travel||420*460mm|
|Z axis moving range||15mm|
|Feeders||Left 29pcs + right 29pcs|
8mm=44pcs, 12mm=8pcs, 16mm=4pcs, 24mm=2pcs,
Front IC stack=14pcs, user-defined IC tray
|Vision system||Dual cameras (up & down cameras)|
|Drive||Closed-loop control stepper servo drive system, make sure never
|Z axis self-return detection||Yes, prevent nozzles breaking|
|Pull pin self-return||Yes|
|Leakage of material detection method||Vacuum detection, vision detection|
|Touch screen||7”industry touch screen|
|Main board||Independent research industry main board|
|System||Embedded Linux system|
|Mounting speed||5000cph (vision off); 3000cph (vision on)|
|Components||0402-5050,SOP,QFN (tape width: 8MM,12MM,16MM,24MM)|
|Machine dimension||L 960mm* W 705mm* H 335mm|
|Vacuum pump||-92KPA (2pcs,build-in, mute type)|
|External air source||No need (machine build-in mute vacuum pump 2pcs)|
|Voltage||220V (110V), 50Hz|
|Gross weight||82kg / 150*80*52cm / 0.62m³|
1. Convenient software, Embedded Linux System of the machine, very stable and fast speed, independent operation,
no need external computer, operation more easy and convenient.
2. Industry touch screen, more stable, high quality.
3. Top and bottom two cameras CCD system correct the position of each components very accurate, especially for IC.
4. It has flexible PCB clamping fixture, and it has user-defined IC tray from stack NO.80. convenient and quick.
5. The vision also can second correction machine origin point, make
sure origin point correct.
6. With two nozzles placing heads, high precise Juki Nozzles with
magnet, no need to disassemble with wrench. 2 nozzles arbitrary rotation angle -180 degree~ +180 degree. Placing height can adjustable.
7. Pull pin automatically return to avoid nozzles broken, pull pin not be stuck, big progress.
8. Z axis detection, placement head can auto back to origin.
9. Closed-loop control, X,Y Axis with encoder, never loose steps.
7. PCB by two visual calibration, first and last componet, amend
the offset of PCB.
8. Calibration can be rapidly and accurately for PCB, do not need
to care about offset, no need to calculate the input.
9. Comes vacuum testing, with automatic feeding; if one component
suck crooked, it will automatically throw it to the feed zone, then
pick a new one to mount again.
10. If lack material it will automatic detection, then alarm; after
supply material, then continue working, no need to re-start.
11. Support any number of PCB batch.
12. If no PCB file, or don’t use protell software, you can creat a
new file to program. Support single step.
Why choose Charmhigh?
1.Light weight body,occupy small area
2.User friendly interface,no need professional SMT
3.High integrated,no need extra pump or any supporting facility
4.High accuracy and reliability,make up the defection of manual
5.Low cost,reduce expense to own a professional automatic SMT
6.International express with door to door service,3-5 working days
7.Especial for laboratory research and development,samples,to avoid
any patents and designs revealment
Standard Accessories for CHMT48VB:
1) Pick and Place MachineCHMT48VB: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pins: 2
6) Coil for pull pin:1
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
With 58pcs feeders, you can mount more material now!
The complete machine has a warranty period of 1 year from the time
of purchase and lifelong service
support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical
advice service. Provide one to one after-sale service.
Each machine 100% test well then sent out.
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89 .
If you want to see more information and videos, please contact us
We will response you at the first time.